ASP 11 is Released!!!
Moderators: Víctor Paredes, Belgarath, slowtiger
ASP 11 is Released!!!
So it is out! What do you guys think so far?
Quick question as I've never upgraded before. I imagine I'll be able to keep ASP 10 and 11 on the same machine, but will that use up 2 licenses to keep them both active? Just curious as I want to have both active during the bug fixing process in 11.
Edit: Never mind I'm dumb. Of course it comes with new serials. I'm now getting confused between subscription licensing and perpetual.
Quick question as I've never upgraded before. I imagine I'll be able to keep ASP 10 and 11 on the same machine, but will that use up 2 licenses to keep them both active? Just curious as I want to have both active during the bug fixing process in 11.
Edit: Never mind I'm dumb. Of course it comes with new serials. I'm now getting confused between subscription licensing and perpetual.
Last edited by jayfaker on Wed May 27, 2015 6:36 pm, edited 1 time in total.
-
- Posts: 16
- Joined: Mon Jun 30, 2014 3:58 pm
Re: ASP 11 is Released!!!
Is it 64bit or win7/8 only now because I got a not a valid win32 application on windows xp?
- hayasidist
- Posts: 3523
- Joined: Wed Feb 16, 2011 8:12 pm
- Location: Kent, England
Re: ASP 11 is Released!!!
XP is no longer supported in AS11 (same for Mac OS X 10.6). AS11 does run on 32bit Win7 and later kit.
-
- Posts: 216
- Joined: Wed Apr 24, 2013 1:06 am
Re: ASP 11 is Released!!!
I updated to v11, and the multiple screen setup issues I was experiencing in v10 and earlier have been (finally) resolved, I believe.
I undock the timeline, and position on my second screen on the left. I undock the tools, and position it on the main screen in the center. I then undock the layers panel, and position it on my third screen on the right, which is pivoted in portrait mode (allowing me to have a very long and extended layer panel!).
Previously, in v10 and before, after closing the application, all the windows would be collected and repositioned on the center main screen. Very frustrating.
And now it works as expected! Woohoo! (there is still a small issue when I maximize the main window in the center screen - the file menu appears on the left screen. Not maximizing it resolves this for now)
Well, so far so good. Loving the referenced layers and the fbf options.
I undock the timeline, and position on my second screen on the left. I undock the tools, and position it on the main screen in the center. I then undock the layers panel, and position it on my third screen on the right, which is pivoted in portrait mode (allowing me to have a very long and extended layer panel!).
Previously, in v10 and before, after closing the application, all the windows would be collected and repositioned on the center main screen. Very frustrating.
And now it works as expected! Woohoo! (there is still a small issue when I maximize the main window in the center screen - the file menu appears on the left screen. Not maximizing it resolves this for now)
Well, so far so good. Loving the referenced layers and the fbf options.
Re: ASP 11 is Released!!!
I like the new logo. It stands out, looks professional, and gives a serious program feel to it.
- strider2000
- Posts: 506
- Joined: Sat Mar 07, 2015 5:14 pm
- Contact:
Re: ASP 11 is Released!!!
It's clear to me that a focus of the new release is team work, but I'd love to see what some of the long time users see as some key uses are for the new features. Frame by frame is clear. So are some of the brush improvements, bone flipping and psd improvements (yay ) Not sure about best use cases for layer referencing for individuals (team value is clear).
I'm wondering if layer referencing might be good to solve issues such as a lack of animation control over stroke hiding. For body turns I'd like the stroke, near the armpit to be visible when the arm is in front and hidden when the arm is behind, so the stroke stops where the arm and body join. It would be great if stroke hiding (not just exposure) could be animated. There are work arounds in 10, stroke thickness on two multiple points and moving the point close or far away as well as patch layers, but there not nice. I'm wondering if this is a good example of how layer referencing could be use. Perhaps it could be a switch layer where the points are controlled in common but the layers only differ by whether or not particular strokes are hidden. If there's a better way I'd love to hear it.
Looking forward to what ideas people have for the new features.
I'm wondering if layer referencing might be good to solve issues such as a lack of animation control over stroke hiding. For body turns I'd like the stroke, near the armpit to be visible when the arm is in front and hidden when the arm is behind, so the stroke stops where the arm and body join. It would be great if stroke hiding (not just exposure) could be animated. There are work arounds in 10, stroke thickness on two multiple points and moving the point close or far away as well as patch layers, but there not nice. I'm wondering if this is a good example of how layer referencing could be use. Perhaps it could be a switch layer where the points are controlled in common but the layers only differ by whether or not particular strokes are hidden. If there's a better way I'd love to hear it.
Looking forward to what ideas people have for the new features.
Re: ASP 11 is Released!!!
I just grabbed the new version. I have been working with 9.2 until now.
For me anyway, layer referencing will be used to sync multiple layers of a single character, for example. I have different mouth switch layers for 6 different emotions and then I have front. 3/4 view, and side view versions of all those mouths. With referencing, I just have to animate one mouth and all the rest will sync.strider2000 wrote: Not sure about best use cases for layer referencing for individuals (team value is clear).
- strider2000
- Posts: 506
- Joined: Sat Mar 07, 2015 5:14 pm
- Contact:
Re: ASP 11 is Released!!!
Interesting. I've been focusing lately on a single character fig with body and head turns, but I see what you're saying. Thanks for sharingWith referencing, I just have to animate one mouth and all the rest will sync.
Re: ASP 11 is Released!!!
So I'm running into some bugs in ASP 11. What would be the best way to report those?
- Víctor Paredes
- Site Admin
- Posts: 5660
- Joined: Wed Jan 26, 2005 12:18 am
- Location: Barcelona/Chile
- Contact:
Re: ASP 11 is Released!!!
Please write them in Bug Discussions. Then I will try to pass them to the developers.jayfaker wrote:So I'm running into some bugs in ASP 11. What would be the best way to report those?
Moho Product Manager
www.mohoanimation.com
Rigged animation supervisor in My father's dragon - Lead Moho artist in Wolfwalkers - Cartoon Saloon - My personal Youtube Channel
-
- Posts: 56
- Joined: Fri Nov 23, 2012 11:40 pm
Re: ASP 11 is Released!!!
@Pinesal I like your idea about using referencing to sync multiple layers. I just can't get my head wrapped around it fully. I love the idea but don't know how to set it up. Can anyone make a video tutorial showing how to use reference layers to sync multiple layers such as different mouth switch layers for 6 different emotions and then have front, 3/4 view, and side view versions of all those mouths. With referencing, I just have to animate one mouth and all the rest will sync?
Re: ASP 11 is Released!!!
I am planning a video tutorial on referencing for this weekend, will keep you posted!Undiscovered wrote:@Pinesal I like your idea about using referencing to sync multiple layers. I just can't get my head wrapped around it fully. I love the idea but don't know how to set it up. Can anyone make a video tutorial showing how to use reference layers to sync multiple layers such as different mouth switch layers for 6 different emotions and then have front, 3/4 view, and side view versions of all those mouths. With referencing, I just have to animate one mouth and all the rest will sync?
Last edited by GCharb on Fri May 29, 2015 4:56 pm, edited 1 time in total.
Re: ASP 11 is Released!!!
So basically, you create one mouth complete it. All other mouths have to have the same number of mouth shapes because everything will be based on the first mouth you make.Undiscovered wrote:@Pinesal I like your idea about using referencing to sync multiple layers. I just can't get my head wrapped around it fully. I love the idea but don't know how to set it up. Can anyone make a video tutorial showing how to use reference layers to sync multiple layers such as different mouth switch layers for 6 different emotions and then have front, 3/4 view, and side view versions of all those mouths. With referencing, I just have to animate one mouth and all the rest will sync?
Make a reference copy of the first mouth, rename the folder but all layer within the folder have to be the same name as the referenced ones. Then you right click on each layer and break the reference. This will let the mouth shape layers be editable but the parent switch layer will still be synced. Then you go into each layer of the new mouth and edit it into the new mouths,
-
- Posts: 127
- Joined: Tue Aug 28, 2012 10:01 pm
- Location: Northern Kentucky, USA
Re: ASP 11 is Released!!!
Hello everyone, I just upgraded to ASP11 and I am very excited as Im sure you are too. I have a question. Is this new version supposed to overwrite and delete the previous version? Reason I'm asking is because now I have both versions on my computer. If it was supposed to get rid of the older version (ASP10.1.3) then I must have done something wrong. I have a MacBook Pro with OS X 10.9.5
Thanks, Just trying to make sure I'm doing everything correctly.
Thanks, Just trying to make sure I'm doing everything correctly.
- Víctor Paredes
- Site Admin
- Posts: 5660
- Joined: Wed Jan 26, 2005 12:18 am
- Location: Barcelona/Chile
- Contact:
Re: ASP 11 is Released!!!
Personally, I had installed 3 versions of the software for months (9.5, 10 and 11 beta) without problems. Just be sure to use different folders for each and try to keep things clean.ThatsNotAllFolks wrote:Hello everyone, I just upgraded to ASP11 and I am very excited as Im sure you are too. I have a question. Is this new version supposed to overwrite and delete the previous version? Reason I'm asking is because now I have both versions on my computer. If it was supposed to get rid of the older version (ASP10.1.3) then I must have done something wrong. I have a MacBook Pro with OS X 10.9.5
Thanks, Just trying to make sure I'm doing everything correctly.
Moho Product Manager
www.mohoanimation.com
Rigged animation supervisor in My father's dragon - Lead Moho artist in Wolfwalkers - Cartoon Saloon - My personal Youtube Channel